oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2010 oscilent controlled document ordering code / part number product description 803-rf243.95m-b phs, if saw filter specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency performance notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 803-rf243.95m-b january 2010 rev a phs, if saw filter product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit source and load impedance: 50 ? pin description a, c, d, f ground b in e out
oscilent part number 803-rf243.95m-b january 2010 rev a phs, if saw filter product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c -10 - +60 storage temperature range c -40 - +85 maximum dc voltage v - - 0 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above) electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz - 243.95 - insertion loss at fo db - 3.2 4.0 amplitude ripple within fo100 khz db - 0.9 1.5 group delay ripple within fo100 khz sec - - 1.2 attenuation: fo ? 23 mhz db 55 61 - fo - 1.2 mhz db 40 54 - fo ? 600 khz db 30 37 - fo + 600 khz db 30 40 - fo + 1.2 mhz db 40 46 - fo + 23 mhz db 55 57 -
oscilent part number 803-rf243.95m-b january 2010 rev a phs, if saw filter product specification p. 3 www.oscilent.com frequency performance
|